Installation

AUDIO / VISUAL: STEERING PAD SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY





(a) Engage the 2 pins and install the steering pad switch assembly.
(b) Install the screw.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)





(c) Engage the 2 pins and install the steering pad switch assembly.
(d) Install the screw.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)
(e) Connect the connector to the spiral cable.
2. INSTALL STEERING PAD Installation
3. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation
4. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT SRS WARNING LIGHT Diagnosis System
7. PERFORM INITIALIZATION Repair Instruction - Initialization