Installation

SEAT: FRONT SEAT CUSHION HEATER: INSTALLATION

INSTALLATION

1. INSTALL FRONT SEPARATE TYPE SEAT CUSHION COVER





(a) Using hog ring pliers, install 16 new hog rings.
NOTICE :
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

2. INSTALL FRONT SEPARATE TYPE SEAT CUSHION ASSEMBLY
3. INSTALL FRONT INNER SEAT CUSHION SHIELD
4. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation
5. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY
6. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
7. INSTALL RECLINING POWER SEAT SWITCH KNOB
8. INSTALL FRONT SEAT ASSEMBLY Installation
9. INSTALL INNER SEAT TRACK BRACKET COVER Installation
10. INSTALL SEAT TRACK COVER Installation
11. INSTALL FRONT SEAT HEADREST ASSEMBLY
12. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

13. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat) Programming and Relearning
14. INSPECT SRS WARNING LIGHT
Inspect SRS warning light. Diagnosis System
15. INSPECT FRONT SEAT ASSEMBLY Installation