Installation

SEAT: FRONT SEATBACK HEATER: INSTALLATION

INSTALLATION

1. INSTALL FRONT SEPARATE TYPE SEATBACK COVER





(a) Using hog ring pliers, install the front separate type seatback cover to the front seatback pad with 10 new hog rings.
NOTICE :
- Be careful not to damage the cover.
- When installing the hog rings, take care to minimize wrinkles as much as possible.

2. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY Reassembly
3. INSTALL FRONT SEAT HEADREST SUPPORT
4. INSTALL FRONT SEAT HEADREST SUPPORT
5. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY
6. INSTALL FRONT INNER SEAT CUSHION SHIELD
7. INSTALL FRONT SEAT INNER BELT ASSEMBLY Installation
8. INSTALL FRONT SEAT CUSHION SHIELD ASSEMBLY
9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
10. INSTALL RECLINING POWER SEAT SWITCH KNOB
11. INSTALL FRONT SEAT ASSEMBLY Installation
12. INSTALL INNER SEAT TRACK BRACKET COVER Installation
13. INSTALL SEAT TRACK COVER Installation
14. INSTALL FRONT SEAT HEADREST ASSEMBLY
15. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

16. PERFORM ZERO POINT CALIBRATION AND SENSITIVITY CHECK (for Front Passenger Seat) Programming and Relearning
17. INSPECT SRS WARNING LIGHT
Inspect SRS warning light. Diagnosis System
18. INSPECT FRONT SEAT ASSEMBLY Installation