Installation

ENGINE HOOD / DOOR: FUEL LID COURTESY SWITCH: INSTALLATION

INSTALLATION

1. INSTALL FUEL LID COURTESY SWITCH





(a) Connect the connector from the cabin side.
(b) Engage the clamp and temporarily install the fuel lid courtesy switch.





(c) Install the fuel lid courtesy switch with the nut and plate from the outside of the vehicle.
Torque: 5.5 Nm (56 kgf-cm, 49in-lbf)
2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH Installation
3. INSTALL LUGGAGE COMPARTMENT REAR TRIM COVER Installation
4. INSTALL REAR FLOOR FINISH PLATE Installation
5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK Installation
6. INSTALL SPARE WHEEL COVER ASSEMBLY
7. INSTALL SPARE WHEEL COVER CLAMP
8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT