Removal

BRAKE CONTROL: SKID CONTROL ECU (for TMMK Made): REMOVAL

REMOVAL

1. PRECAUTION
NOTICE: Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
HINT: Refer the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD". Removal

4. SEPARATE WIRING HARNESS CLAMP BRACKET
(a) Disconnect the wiring harness clamp and connectors.





(b) Remove the 2 nuts and the bolt, and separate the wiring harness clamp bracket.
5. REMOVE SKID CONTROL ECU





(a) Disconnect the 4 skid control ECU connectors.





(b) Remove the 2 nuts and skid control ECU.