Installation

BRAKE CONTROL: STEERING ANGLE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR





(a) Align the locating pins, engage the claws, and install the steering angle sensor to the spiral cable.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR Installation
3. INSTALL STEERING COLUMN COVER Installation
4. ADJUST SPIRAL CABLE Installation
5. INSTALL STEERING WHEEL ASSEMBLY Installation
6. INSPECT STEERING WHEEL CENTER POINT
7. INSTALL STEERING PAD Installation
8. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation
9. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. INSPECT STEERING PAD Installation
12. INSPECT SRS WARNING LIGHT Installation
13. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal. Repair Instruction - Initialization