Removal

AIR CONDITIONING: HEATER WATER PUMP: REMOVAL

REMOVAL

1. SEPARATE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY Removal
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
4. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal
5. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal
6. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
7. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal
8. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY Removal
9. REMOVE HEATER WATER OUTLET HOSE





(a) Using pliers, grip the claws of the clip and slide the clip to disconnect the heater water outlet hose.
10. REMOVE HEATER WATER INLET HOSE
HINT: Disconnection procedure for the heater water inlet hose is the same as that for the heater water outlet hose.

11. REMOVE HEATER WATER PUMP





(a) Disconnect the connector.
(b) Remove the 2 nuts and heater water pump.