Crankshaft Main Bearing: Specifications
MAIN BEARING CAPStep 1
Install and uniformly tighten the 10 main bearing cap bolts in the sequence shown in the illustration.
Torque 20 Nm (204 kgf-cm, 15 ft-lbf)
Further tighten the 10 main bearing cap bolts in the sequence shown in the illustration.
Torque 40 Nm (408 kgf-cm, 30ft-lbf)
Step 2
Mark the front of the bearing cap bolts with paint.
Further tighten the bearing cap bolts 90° in the sequence shown in the previous illustration.
Check that the paint mark is now at a 90° angle to the front.
