Installation

AIR CONDITIONING: HEATER WATER PUMP: INSTALLATION

INSTALLATION

1. INSTALL HEATER WATER PUMP





(a) Install the heater water pump with the 2 nuts.
Torque: 9.8 Nm (100 kgf-cm, 87in-lbf)
(b) Connect the connector.
2. INSTALL HEATER WATER INLET HOSE
(a) Install the water hose and attach the clip.
3. INSTALL HEATER WATER OUTLET HOSE





(a) Install the water hose and attach the clip.
4. INSTALL COWL TOP PANEL OUTER SUB-ASSEMBLY Installation
5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation
6. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation
7. INSTALL FRONT FENDER TO COWL SIDE SEAL RH Installation
8. INSTALL FRONT FENDER TO COWL SIDE SEAL LH Installation
9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation
10. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation
11. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY Installation