Removal

BRAKE CONTROL: SKID CONTROL BUZZER (for TMC Made): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT DOOR SCUFF PLATE LH Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal
5. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY Removal
6. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL Removal
7. REMOVE SKID CONTROL BUZZER





(a) Disconnect the skid control buzzer connector.
(b) Disengage the claw and remove the skid control buzzer.