Installation

BRAKE CONTROL: SKID CONTROL BUZZER (for TMMK Made): INSTALLATION

INSTALLATION

1. INSTALL SKID CONTROL BUZZER





(a) Engage the claw and install the skid control buzzer.
(b) Connect the skid control buzzer connector.
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation
3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY Installation
4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation
5. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
6. INSTALL FRONT DOOR SCUFF PLATE LH Installation
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal. Repair Instruction - Initialization