Dome Lamp: Testing and Inspection

LIGHTING: REAR ROOM LIGHT ASSEMBLY: INSPECTION

INSPECTION

1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY (without Sliding Roof)





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:





If the result is not as specified, repair or replace harness or connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:





If the result is not as specified, repair or replace the harness or connector.
2. INSPECT SPOT LIGHT ASSEMBLY (with Sliding Roof)





(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
LH Side





RH Side





If the result is not as specified, repair or replace harness or connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard voltage:
LH Side





RH Side





If the result is not as specified, repair or replace the harness or connector.