Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING ECU: REMOVAL

REMOVAL
NOTICE: Before removing the tire pressure warning ECU, read the registered transmitter IDs of all wheels and write them down to use for re-registration of transmitter IDs Registration.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal
3. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH Removal
4. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC Made) Removal
5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) Removal
6. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Removal
7. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Removal
8. REMOVE TIRE PRESSURE WARNING ECU





(a) Remove the nut.
(b) Disconnect the connector and remove the tire pressure warning ECU.