Removal

2AZ-FXE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. DRAIN COOLANT (for Engine) Testing and Inspection
2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal
3. REMOVE AIR CLEANER INLET ASSEMBLY Removal
4. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
5. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
6. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Disconnect the engine coolant temperature sensor connector.
(b) Using SST, remove the engine coolant temperature sensor and gasket.
SST: 09817-33190