Installation

POWER STEERING: POWER STEERING ECU: INSTALLATION

INSTALLATION

1. INSTALL POWER STEERING ECU ASSEMBLY





(a) Install the power steering ECU assembly with the bolt and 2 nus.
Torque: 8.5 Nm (87 kgf-cm, 75in-lbf)





(b) Connect the 2 power steering ECU assembly connectors and securely lock the connectors as shown in the illustration.





(c) Connect the connector and install the hose clamp to the power steering ECU assembly.
2. INSTALL COWL TOP PANEL OUTER SUB-ASSEMBLY Installation
3. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Installation
4. INSTALL COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Installation
5. INSTALL FRONT FENDER TO COWL SIDE SEAL RH Installation
6. INSTALL FRONT FENDER TO COWL SIDE SEAL LH Installation
7. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH Installation
8. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH Installation
9. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY Installation
10. INSTALL AIR CLEANER CASE SUB-ASSEMBLY Installation
11. INSTALL AIR CLEANER CAP SUB-ASSEMBLY Installation
12. INSTALL AIR CLEANER INLET ASSEMBLY Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
14. PERFORM INITIALIZATION
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.

15. INITIALIZE ROTATION ANGLE SENSOR AND CALIBRATE TORQUE SENSOR ZERO POINT
HINT: Programming and Relearning