Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY (for TMC Made): INSTALLATION

INSTALLATION

1. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY





(a) Connect the 2 connectors.
(b) Install the clamp and the instrument panel wire assembly on the front passenger airbag assembly.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY





(a) Engage the 10 hooks and install the front passenger airbag assembly on the instrument panel.





(b) Install the 2 screws.
3. INSTALL NO. 3 INSTRUMENT PANEL STAY Installation
4. INSTALL INSTRUMENT PANEL SAFETY PAD ASSEMBLY Installation
5. CONNECT INSTRUMENT PANEL WIRE ASSEMBLY





(a) Connect the connector.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

6. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH Installation
7. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for LH Side) Removal
8. INSTALL INSTRUMENT PANEL NO. 1 SPEAKER PANEL SUB-ASSEMBLY Installation
9. INSTALL INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY Installation
10. INSTALL FRONT PILLAR GARNISH LH Installation
11. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY (for RH Side) Installation
12. INSTALL INSTRUMENT PANEL NO. 2 SPEAKER PANEL SUB-ASSEMBLY Installation
13. INSTALL INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY Installation
14. INSTALL FRONT PILLAR GARNISH RH Installation
15. INSTALL NO. 1 CONSOLE BOX INSERT FRONT Installation
16. INSTALL NO. 2 CONSOLE BOX INSERT FRONT Installation
17. INSTALL CONSOLE BOX ASSEMBLY Installation
18. INSTALL CONSOLE BOX CARPET Installation
19. INSTALL CONSOLE BOX POCKET Installation
20. INSTALL RADIO RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/o Navigation System) Installation
21. INSTALL NAVIGATION RECEIVER WITH HEATER CONTROL PANEL ASSEMBLY (w/ Navigation System) Installation
22. INSTALL INSTRUMENT PANEL NO. 2 REGISTER ASSEMBLY Installation
23. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
24. INSTALL UPPER CONSOLE REAR PANEL SUB-ASSEMBLY Installation
25. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY Installation
26. INSTALL NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation
27. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH Installation
28. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Installation
29. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY Installation
30. INSTALL INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY Installation
31. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
32. INSTALL FRONT DOOR SCUFF PLATE RH Installation
33. INSTALL COMBINATION METER ASSEMBLY Installation
34. INSTALL INSTRUMENT CLUSTER FINISH PANEL Installation
35. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL Installation
36. INSTALL NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY Installation
37. INSTALL TURN SIGNAL SWITCH ASSEMBLY WITH SPIRAL CABLE SUB-ASSEMBLY Installation
38. ADJUST SPIRAL CABLE Installation
39. INSTALL STEERING COLUMN COVER Installation
40. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation
41. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH Installation
42. INSTALL FRONT DOOR SCUFF PLATE LH Installation
43. INSTALL STEERING WHEEL ASSEMBLY Installation
44. INSTALL STEERING PAD Installation
45. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation
46. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation
47. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
48. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTICE: Some systems need initialization after reconnecting the cable to the negative battery terminal.

49. INSPECT STEERING PAD Installation
50. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.