Removal

SEAT BELT: FRONT SEAT OUTER BELT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment Service Precautions.

2. REMOVE LAP BELT OUTER ANCHOR COVER





(a) Disengage the 3 claws and remove the lap belt outer anchor cover.
3. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY





(a) Remove the bolt and disconnect the floor end of the front seat outer belt assembly.
4. REMOVE FRONT DOOR SCUFF PLATE Removal
5. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP
6. REMOVE REAR DOOR SCUFF PLATE Removal
7. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP
8. REMOVE LOWER CENTER PILLAR GARNISH Removal
9. REMOVE UPPER CENTER PILLAR GARNISH Removal
10. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY





(a) Remove the nut and disconnect the shoulder anchor of the front seat outer belt assembly.
11. REMOVE FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY





(a) Remove the 2 bolts and the front shoulder belt anchor adjuster assembly.
12. REMOVE FRONT SEAT OUTER BELT ASSEMBLY





(a) Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the connector as shown in the illustration.
HINT: Tape the screwdriver tip before use.





(b) Remove the 2 bolts and the front seat outer belt assembly.