Removal

SUPPLEMENTAL RESTRAINT SYSTEM: REAR AIRBAG SENSOR: REMOVAL

REMOVAL
HINT:
- Use the same procedure for the RH side and the LH side.
- The procedure listed below are for the LH side.

1. PRECAUTION
CAUTION: Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
4. REMOVE REAR DOOR SCUFF PLATE Removal
5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP
6. REMOVE ROOF SIDE INNER GARNISH Removal
7. REMOVE REAR SIDE SEATBACK ASSEMBLY Removal
8. REMOVE REAR AIRBAG SENSOR





(a) Disconnect the connector.
NOTICE: When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the bolt and rear airbag sensor.