Diesel Data: Automotive Repair
Home >> Toyota >> 2009 >> Camry L4-2.4L (2AZ-FXE) Hybrid >> Repair and Diagnosis >> Steering and Suspension >> Relays and Modules - Steering and Suspension >> Relays and Modules - Steering >> Steering Control Module >> Service and Repair >> Removal

Removal








POWER STEERING: POWER STEERING ECU: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE AIR CLEANER INLET ASSEMBLY Removal
3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
5. SEPARATE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY Removal
6. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
7. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
8. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal
9. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal
10. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
11. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal
12. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY Removal
13. REMOVE POWER STEERING ECU ASSEMBLY





(a) Disconnect the connector and separate the hose clamp from the power steering ECU assembly.





(b) Release the locks of the 2 power steering ECU assembly connectors and disconnect the connectors.





(c) Remove the bolt, 2 nuts, and the power steering ECU assembly.
Diesel-Data.com