Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

REMOVAL
NOTICE: Check if an old gasket still remains on the pipe. If so, remove it. Also, check if any bolts or nuts are rusted. If so, replace them.

1. REMOVE REAR WHEELS
2. REMOVE FLOOR NO. 1 UNDER COVER Removal
3. REMOVE FLOOR NO. 2 UNDER COVER Removal
4. REMOVE CENTER EXHAUST PIPE ASSEMBLY Removal
5. REMOVE REAR STABILIZER LINK ASSEMBLY LH





(a) Remove the 2 nuts and rear stabilizer link assembly LH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

6. REMOVE REAR STABILIZER LINK ASSEMBLY RH





(a) Remove the 2 nuts and rear stabilizer link assembly RH.
HINT: If the ball joint turns together with the nut, use a hexagon wrench (5 mm) to hold the stud.

7. REMOVE REAR STABILIZER BAR NO. 1 BRACKET





(a) Remove the 2 bolts and rear stabilizer bar No. 1 bracket.
8. REMOVE REAR STABILIZER BUSHING
(a) Remove the 2 rear stabilizer bushings from the rear stabilizer bar.
9. REMOVE REAR STABILIZER BAR