Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING RESET SWITCH: INSTALLATION

INSTALLATION

1. INSTALL TIRE PRESSURE WARNING RESET SWITCH





(a) Engage the 2 claws to install the tire pressure warning reset switch.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMC Made) Installation
3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for TMMK Made) Installation
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMC Made) Installation
5. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for TMMK Made) Installation
6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH Installation
7. INSTALL FRONT DOOR SCUFF PLATE RH Installation
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

9. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: Test Mode Procedure