Installation

METER: STEERING PAD SWITCH: INSTALLATION

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY (for 4 Spoke)





(a) Engage the 2 pins and install the steering pad switch assembly.
(b) Install the screw.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)





(c) Engage the 2 pins and install the steering pad switch assembly.
(d) Install the screw.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)
(e) Connect the connector to the spiral cable.
2. INSTALL STEERING PAD SWITCH LH (for 4 Spoke)





(a) Engage the 2 pins and install the steering pad switch LH.
(b) Install the screw.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)
(c) Connect the connector to the spiral cable.
3. INSTALL STEERING PAD SWITCH ASSEMBLY (for 3 Spoke)





(a) Engage the 2 pins and install the steering pad switch assembly.
(b) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)





(c) Engage the 2 pins and install the steering pad switch assembly.
(d) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)
(e) Connect the connector to the spiral cable.
4. INSTALL STEERING PAD SWITCH LH (for 3 Spoke)





(a) Engage the 2 pins and install the steering pad switch LH.
(b) Install the screw and engage the clamp.
Torque: 2.4 Nm (24 kgf-cm, 21in-lbf)
(c) Connect the connector to the spiral cable.
5. INSTALL STEERING PAD Installation
6. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
7. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. INSPECT SRS WARNING LIGHT Installation