Problem Symptoms Table

BRAKE CONTROL: ANTI-LOCK BRAKE SYSTEM: PROBLEM SYMPTOMS TABLE

PROBLEM SYMPTOMS TABLE

If a normal code is displayed during the DTC check but the problem still occurs, check the circuits for each problem symptom in the order given in the table below and proceed to the relevant troubleshooting.
NOTICE: When replacing the skid control ECU, sensor, etc., turn the ignition switch off.
HINT:
- Inspect the fuses and relays before investigating the suspected areas as shown in the table below.
- Inspect each malfunction circuit in numerical order for the corresponding symptoms.

ANTI-LOCK BRAKE SYSTEM: