Removal

BRAKE: BRAKE BOOSTER: REMOVAL

REMOVAL

1. REMOVE BRAKE PEDAL RETURN SPRING





(a) Remove the brake pedal return spring.
2. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
(a) Remove the clip and the push rod pin, and separate the master cylinder push rod clevis.
3. DISCONNECT NO. 2 VACUUM HOSE





(a) Slide the clip and disconnect the No. 2 vacuum hose.
4. REMOVE BRAKE MASTER CYLINDER SUB-ASSEMBLY
HINT: Refer to the procedures up to "REMOVE MASTER CYLINDER". Removal

5. REMOVE BRAKE BOOSTER ASSEMBLY





(a) Remove the 4 nuts and the brake booster assembly.
NOTICE: Do not damage the brake lines.

6. REMOVE BRAKE BOOSTER GASKET





(a) Remove the brake booster gasket.
7. REMOVE BRAKE MASTER CYLINDER PUSH ROD CLEVIS
(a) Loosen the lock nut and remove the brake master cylinder push rod clevis.