Crankshaft: Specifications

CRANKSHAFT

Crankshaft timing gear:
Minimum Diameter (w/ chain) 61.4 mm (2.417 in.)

Crankshaft thrust clearance Standard 0.04 to 0.24 mm (0.0016 to 0.0094 in.)
Crankshaft thrust clearance Maximum 0.30 mm (0.0118 in.)
Thrust washer thickness 2.43 to 2.48 mm (0.0957 to 0.0976 in.)

Crankshaft oil clearance:
Standard 0.026 to 0.047 mm (0.0010 to 0.0019 in.)
Maximum 0.050 mm (0.0020 in.)

Crankshaft circle runout
Maximum 0.06 mm (0.0024 in.)

Crank pin diameter 52.992 to 53.000 mm (2.0863 to 2.0866 in.)

Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 in.)