Installation

LIGHTING: FOG LIGHT ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL FOG LIGHT ASSEMBLY





(a) Install the fog light assembly with the screw.
Torque: 1.6 Nm (16 kgf-cm, 14in-lbf)
2. INSTALL FRONT BUMPER ASSEMBLY Installation
3. INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE) Installation
4. VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT Adjustments
5. PREPARATION FOR FOG LIGHT AIMING Adjustments
6. FOG LIGHT AIMING INSPECTION Adjustments
7. FOG LIGHT AIMING ADJUSTMENT Adjustments