Removal

2GR-FE ENGINE CONTROL SYSTEM: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL

REMOVAL

1. REMOVE ENGINE UNDER COVER LH
2. REMOVE ENGINE UNDER COVER RH
3. DRAIN ENGINE COOLANT Testing and Inspection
4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
5. REMOVE AIR CLEANER INLET ASSEMBLY Removal
6. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
7. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal
8. REMOVE NO. 1 AIR CLEANER INLET Removal
9. REMOVE ENGINE COOLANT TEMPERATURE SENSOR





(a) Remove the engine coolant temperature sensor connector.
(b) Remove the engine coolant temperature sensor.