Removal

2GR-FE FUEL: FUEL PRESSURE PULSATION DAMPER: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE
HINT: Technician Safety Information

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. DRAIN ENGINE COOLANT Testing and Inspection
4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
6. REMOVE FRONT FENDER TO COWL SIDE SEAL LH Removal
7. REMOVE FRONT FENDER TO COWL SIDE SEAL RH Removal
8. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY Removal
9. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY Removal
10. REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY Removal
11. REMOVE V-BANK COVER SUB-ASSEMBLY Removal
12. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal
13. REMOVE INTAKE AIR SURGE TANK ASSEMBLY Removal
14. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY





(a) Remove the clip.
(b) Pull out the fuel pressure pulsation damper from the fuel delivery pipe.
(c) Remove the O-ring from the fuel pressure pulsation damper.