Removal

ENGINE IMMOBILISER: CERTIFICATION ECU (w/ Smart Key System): REMOVAL

REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedure for the RH side and the LH side Removal.

2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedure for the RH side and the LH side Removal.

3. REMOVE INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY Removal
4. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY Removal
5. REMOVE CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)





(a) Disconnect the connector.
(b) Remove the 2 nuts and the certification ECU (smart key ECU assembly).