Navigation System

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: 62-78: DSP Error

DTC 62-78 - DSP Error

DESCRIPTION





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.
NOTICE:
- This code may be output even if there is no malfunction.
- If this code is output frequently, replace the navigation receiver assembly.

PROCEDURE

1. CLEAR DTC
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
NEXT -- Continue to next step.
2. RECHECK FOR DTC
(a) Recheck for DTCs and check if the same trouble occurs again.
OK:
The same trouble does not occur.
NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY
OK -- END