CD Cannot be Inserted / Played or CD is Ejected Right After Insertion

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: CD cannot be Inserted / Played or CD is Ejected Right After Insertion

CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED
(a) Make sure that the CD is an audio CD or a CD with an MP3 or WMA file, and that it is not deformed, flawed, stained, burred, or otherwise defective.
OK:
The CD is normal.
HINT:
- Translucent or uniquely-shaped CDs cannot be played.
- Commercial audio CDs can be played.
- CD-DA files on CD-ROMs, CD-Rs, and CD-RWs can be played.
- MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

NG -- CD IS FAULTY
OK -- Continue to next step.
2. CHECK THAT CD IS INSERTED PROPERLY
(a) Check whether or not the CD is inserted upside down.
OK:
CD is properly inserted.
NG -- SET CD PROPERLY
OK -- Continue to next step.
3. CHECK CD




(a) Clean the disc by wiping it with a soft cloth from the inside to the outside in a radial direction.
NOTE: Do not use a conventional record cleaner or anti-static preservative.

NG -- REPLACE CD WITH ANOTHER AND RECHECK
OK -- CD WAS DIRTY
4. REPLACE CD WITH ANOTHER AND RECHECK
(a) Replace the CD with a known good one and check that the same trouble does not occur.
OK:
The same trouble does not occur.
NG -- REPLACE NAVIGATION RECEIVER ASSEMBLY
OK -- CD IS FAULTY