Reassembly

INTERIOR PANELS / TRIM: UPPER INSTRUMENT PANEL: REASSEMBLY

REASSEMBLY

1. INSTALL NO. 1 INSTRUMENT PANEL CUSHION





(a) Install a new No. 1 instrument panel cushion as shown in the illustration.






2. INSTALL SOLAR SENSOR (for Automatic Air Conditioning System)





(a) Engage the 2 claws and install the solar sensor.
3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)





(a) Engage the 2 claws and install the automatic light control sensor.
4. INSTALL NO. 2 INSTRUMENT PANEL WIRE (w/ Automatic Light Control System)





(a) Engage the 6 clamps.
(b) Connect each connector and install the No. 2 instrument panel wire.
5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY





(a) Engage the 4 claws and install the No. 1 instrument panel register assembly.
6. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY





(a) Engage the 4 claws and install the No. 2 instrument panel register assembly.
7. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY Installation
8. INSTALL NAVIGATION ANTENNA ASSEMBLY (w/ Navigation System) Installation
9. INSTALL NO. 4 INSTRUMENT PANEL CUSHION (for TMC Made)





(a) Install a new No. 4 instrument panel cushion.
10. INSTALL NO. 3 INSTRUMENT PANEL CUSHION (for TMC Made)





(a) Install a new No. 3 instrument panel cushion.
11. INSTALL NO. 2 INSTRUMENT PANEL CUSHION (for TMC Made)





(a) Install a new No. 2 instrument panel cushion.
12. INSTALL NO. 2 INSTRUMENT PANEL CUSHION (for TMMC, NUMMI Made)





(a) Install a new No. 2 instrument panel cushion.
13. INSTALL NO. 3 HEATER TO REGISTER DUCT





(a) Install the No. 3 heater to register duct with the 3 screws [B].
14. INSTALL NO. 1 HEATER TO REGISTER DUCT





(a) Install the No. 1 heater to register duct with the 3 screws [B].
15. INSTALL NO. 2 HEATER TO REGISTER DUCT





(a) Install the No. 2 heater to register duct with the 4 screws [B].
16. INSTALL DEFROSTER NOZZLE ASSEMBLY





(a) Install the defroster nozzle assembly with the 3 screws [B].