Installation

PARKING BRAKE: PARKING BRAKE SWITCH: INSTALLATION

INSTALLATION

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY





(a) Connect the connector to the parking brake switch assembly.





(b) Install the parking brake switch assembly to the parking brake lever assembly with the screw.
Torque: 0.9 Nm (9 kgf-cm, 8 in-lbf)
2. INSPECT BRAKE WARNING LIGHT Adjustments
3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation
4. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation
5. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation
6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation
7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation
9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH Installation