Installation

HEATING / AIR CONDITIONING: ROOM TEMPERATURE SENSOR: INSTALLATION

INSTALLATION

1. INSTALL ROOM TEMPERATURE SENSOR





(a) Engage the 2 claws and install the room temperature sensor.
(b) Engage the air hose.
(c) Connect the connector.
2. INSTALL NO. 1 SWITCH HOLE BASE (w/o Smart Key System) Installation
3. INSTALL NO. 1 SWITCH HOLE BASE (w/ Smart Key System) Installation
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation
5. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Installation
7. INSTALL UPPER STEERING COLUMN COVER Installation
8. INSTALL LOWER STEERING COLUMN COVER Installation
9. TURN FRONT WHEELS TO FACE STRAIGHT AHEAD
10. ADJUST SPIRAL CABLE Installation
11. INSTALL STEERING WHEEL ASSEMBLY Installation
12. INSTALL STEERING PAD Installation
13. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
14. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
15. INSPECT STEERING WHEEL CENTER POINT
16. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
18. INSPECT STEERING PAD Installation
19. INSPECT SRS WARNING LIGHT
Diagnosis System