Removal

2ZR-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: REMOVAL

REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE Removal
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3. REMOVE FUEL SUCTION TUBE ASSEMBLY WITH PUMP AND GAUGE
(a) Remove the fuel suction tube assembly with pump and gauge Removal.
4. REMOVE FUEL SENDER GAUGE ASSEMBLY





(a) Disconnect the fuel sender gauge connector.
NOTE: Do not damage the wire harness.

(b) Release the lock and slide the fuel sender gauge assembly to remove it.
NOTE: Make sure that the fuel sender gauge arm does not bend.