Installation

EXTERIOR PANELS / TRIM: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER ASSEMBLY
(a) Connect the fog light connector. (w/ Fog Light)





(b) Engage the 6 claws and install the front bumper assembly as shown in the illustration.





(c) Install the 2 screws and 3 clips.





(d) Install the 2 clips.





(e) Install the 4 screws.





(f) Install the pin hold clip and clip.
HINT: Use the same procedure for the RH side and LH side.

2. INSTALL NO. 4 ENGINE UNDER COVER





(a) Install the No. 4 engine under cover with the 4 screws and 4clips.
3. INSTALL RADIATOR GRILLE PROTECTOR





(a) Install the 2 radiator grille protectors.
4. VEHICLE PREPARATION FOR FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) Adjustments
5. PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) Adjustments
6. INSPECT FOG LIGHT AIMING (w/ Fog Light) Adjustments
7. ADJUST FOG LIGHT AIMING (w/ Fog Light) Adjustments