Reassembly

EXTERIOR PANELS / TRIM: REAR BUMPER: REASSEMBLY

REASSEMBLY

1. INSTALL REAR BUMPER ARM LH





(a) Install the rear bumper arm LH with the 3 bolts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
2. INSTALL REAR BUMPER ARM RH
HINT: Use the same procedure for the RH side and LH side.

3. INSTALL NO. 1 REAR BUMPER REINFORCEMENT





(a) Install the No. 1 rear bumper reinforcement with the 4 nuts.
Torque: 36 Nm (367 kgf-cm, 27 ft-lbf)
4. INSTALL REAR BUMPER ENERGY ABSORBER





(a) Install the rear bumper energy absorber.
5. INSTALL REAR UPPER BUMPER RETAINER LH





(a) Engage the 2 claws and install the rear upper bumper retainer LH.
(b) Install the screw.
6. INSTALL REAR UPPER BUMPER RETAINER RH
HINT: Use the same procedure for the RH side and LH side.

7. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT LH





(a) Engage the 2 claws and install the No. 2 rear bumper side support LH.
(b) Install the screw.
8. INSTALL NO. 2 REAR BUMPER SIDE SUPPORT RH
HINT: Use the same procedure for the RH side and LH side.

9. INSTALL REAR BUMPER SIDE SUPPORT LH





(a) Engage the 3 claws and install the rear bumper side support LH.
(b) Install the 2 screws and clip.
10. INSTALL REAR BUMPER SIDE SUPPORT RH
HINT: Use the same procedure for the RH side and LH side.

11. INSTALL REAR BUMPER PAD LH





(a) Install a new rear bumper pad LH.
HINT: Attach the new bumper pad on the line marked on the rear bumper assembly.

12. INSTALL REAR BUMPER PAD RH
HINT: Use the same procedure for the RH side and LH side.

13. INSTALL REAR BUMPER PAD





(a) Install 2 new rear bumper pads.
HINT:
- Attach the new bumper pads on the line marked on the rear bumper assembly.
- Use the same procedure for the RH side and LH side.

14. INSTALL REFLEX REFLECTOR ASSEMBLY LH





(a) Install the reflex reflector assembly with the nut.
15. INSTALL REFLEX REFLECTOR ASSEMBLY RH
HINT: Use the same procedure for the RH side and LH side.

16. INSTALL REAR SPOILER (w/ Rear Spoiler)





(a) Engage the clip.





(b) Engage the 10 clips and install the rear side spoiler.





(c) Install the 7 clips.





(d) Install the 2 clips.





(e) Install the 2 screws and 3 clips.