Reassembly

EXTERIOR PANELS / TRIM: REAR SPOILER: REASSEMBLY

REASSEMBLY
HINT: When installing the protector, heat the rear spoiler using a heat light.

Heating Temperature:





NOTE: Do not heat the rear spoiler excessively.

1. INSTALL CENTER STOP LIGHT CORD ASSEMBLY
2. INSTALL CENTER STOP LIGHT ASSEMBLY Installation
3. INSTALL REAR SPOILER SIDE PROTECTOR LH
(a) Clean the rear spoiler (if reusing the rear spoiler).
(1) Using a heat light, carefully heat the rear spoiler.
(2) Wipe off any tape adhesive residue with cleaner.




(3) Apply a new rear spoiler side protector to the rear spoiler.
4. INSTALL REAR SPOILER SIDE PROTECTOR RH
HINT: Use the same procedure for the RH side and LH side.

5. INSTALL REAR SPOILER LOWER TAPE LH
(a) Clean the rear spoiler (if reusing the rear spoiler).
(1) Using a heat light, carefully heat the rear spoiler.
(2) Wipe off any tape adhesive residue with cleaner.




(3) Apply a new rear spoiler lower tape to the rear spoiler.
6. INSTALL REAR SPOILER LOWER TAPE RH
HINT: Use the same procedure for the RH side and LH side.