Removal

LIGHTING (EXT): AUTOMATIC LIGHT CONTROL SENSOR: REMOVAL

REMOVAL

1. PRECAUTION
Upper Instrument Panel
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.

3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH Removal
4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
7. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY Removal
8. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Removal
9. REMOVE COMBINATION METER ASSEMBLY Removal
10. REMOVE FRONT PILLAR GARNISH LH (w/o Curtain Shield Airbag) Removal
11. REMOVE FRONT PILLAR GARNISH LH (w/ Curtain Shield Airbag) Removal
12. REMOVE FRONT PILLAR GARNISH RH (w/o Curtain Shield Airbag) Removal
13. REMOVE FRONT PILLAR GARNISH RH (w/ Curtain Shield Airbag) Removal
14. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Removal
15. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP LH Removal
16. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY Removal
17. REMOVE NO. 1 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY Removal
18. DISCONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH Removal
19. DISCONNECT INSTRUMENT PANEL WIRE ASSEMBLY Removal
20. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY Removal
21. REMOVE AUTOMATIC LIGHT CONTROL SENSOR





(a) Disconnect the connector.
(b) Disengage the 2 claws and remove the automatic light control sensor.