Removal

2AZ-FE STARTING: IGNITION SWITCH: REMOVAL

REMOVAL
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.

1. ALIGN FRONT WHEELS STRAIGHT AHEAD
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

3. REMOVE LOWER NO. 3 STEERING WHEEL COVER Removal
4. REMOVE LOWER NO. 2 STEERING WHEEL COVER Removal
5. REMOVE STEERING PAD Removal
6. REMOVE STEERING WHEEL ASSEMBLY Removal
7. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Removal
8. REMOVE LOWER STEERING COLUMN COVER Removal
9. REMOVE UPPER STEERING COLUMN COVER Removal
10. REMOVE IGNITION SWITCH ASSEMBLY





(a) Disconnect the connector from the ignition switch.





(b) Remove the 2 screws and ignition switch.