Reassembly

U250E AUTOMATIC TRANSMISSION / TRANSAXLE: SHIFT LEVER: REASSEMBLY

REASSEMBLY

1. INSTALL SHIFT LOCK CONTROL ECU SUB-ASSEMBLY





(a) Engage the 3 claws and install the shift lock control ECU sub-assembly to the shift lock control unit.
(b) Connect the shift lock solenoid connector to the shift lock control ECU sub-assembly.
2. INSTALL POSITION INDICATOR LIGHT BULB
(a) Install the cap to the bulb.
(b) Install the bulb to the position indicator light wire socket.
3. INSTALL INDICATOR LIGHT WIRE SUB-ASSEMBLY





(a) Connect terminals 7 and 14 to the connector as shown in the illustration.
(b) Push in the stopper.





(c) Install the position indicator light wire socket and connector to the shift lock control unit.
4. INSTALL NO. 2 POSITION INDICATOR SLIDE COVER





(a) Install the No. 2 position indicator slide cover to the position indicator slide cover.
5. INSTALL POSITION INDICATOR SLIDE COVER





(a) Install the position indicator slide cover with the No. 2 position indicator slide cover to the shift lock control unit.
6. INSTALL SHIFT LOCK RELEASE BUTTON COVER
(a) Install the shift lock release button cover to the position indicator housing sub-assembly.
7. INSTALL FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY





(a) Engage the 4 claws and install the floor shift position indicator housing sub-assembly to the shift lock control unit.
NOTE: Make sure that the claws are firmly engaged.