Removal

CLUTCH: CLUTCH MASTER CYLINDER: REMOVAL

REMOVAL

1. DISCONNECT CLUTCH RESERVOIR TUBE
(a) Loosen the clip and disconnect the clutch reservoir tube from the clutch master cylinder assembly.
NOTE: Wash off clutch fluid immediately if it comes in contact with any painted surface.
HINT: Use a container to catch the fluid.





2. DISCONNECT CLUTCH LINE
(a) Using a union nut wrench (10 mm), disconnect the clutch line.
HINT: Use a container to catch the fluid.

3. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY





(a) Remove the clip and hole pin.





(b) Remove the 2 nuts and clutch master cylinder.
(c) Remove the clutch master cylinder bracket.