Installation

DOOR / HATCH: HOOD LOCK CONTROL CABLE ASSEMBLY: INSTALLATION

INSTALLATION

1. INSTALL HOOD LOCK CONTROL CABLE ASSEMBLY
(a) Pass the hood lock control cable assembly into the engine compartment.

(b) Pass the cable through the upper radiator support.
(c) Connect the clamps as shown in the illustration.
2. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

(a) Install the hood lock control lever and connect the hood lock control cable.
3. INSTALL HOOD LOCK ASSEMBLY

(a) Apply MP grease to the sliding areas of the lock.

(b) Connect the hood lock control cable.

(c) Install the hood lock assembly with the 3 bolts.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
4. INSPECT HOOD SUB-ASSEMBLY Testing and Inspection
5. ADJUST HOOD SUB-ASSEMBLY Adjustments
6. INSTALL FRONT FENDER LINER

(a) Install the front fender liner with 3 new grommets and the 5 screws.
(b) Install the 9 clips.