Removal

DOOR LOCK: FRONT DOOR LOCK: REMOVAL

REMOVAL

1. REMOVE FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) Disassembly
2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL Disassembly
3. REMOVE FRONT ARMREST UPPER BASE PANEL (w/o Power Window) Disassembly
4. REMOVE FRONT ARMREST UPPER BASE PANEL (w/ Power Window) Disassembly
5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY Disassembly
6. REMOVE FRONT DOOR INSIDE HANDLE SUB-ASSEMBLY Disassembly
7. REMOVE FRONT DOOR INNER GLASS WEATHERSTRIP Disassembly
8. REMOVE FRONT DOOR SERVICE HOLE COVER (w/o Power Door Lock) Disassembly
9. REMOVE FRONT DOOR SERVICE HOLE COVER (w/ Power Door Lock) Disassembly
10. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (w/o Power Window) Disassembly
11. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY (w/ Power Window) Disassembly
12. REMOVE FRONT DOOR GLASS RUN Disassembly
13. REMOVE FRONT DOOR REAR LOWER FRAME SUB-ASSEMBLY Disassembly
14. REMOVE FRONT DOOR OUTSIDE HANDLE COVER Disassembly
15. REMOVE FRONT DOOR OUTSIDE HANDLE ASSEMBLY Disassembly
16. REMOVE FRONT DOOR LOCK ASSEMBLY (w/o Power Door Lock)





(a) Using a "TORX" socket wrench (T30), remove the 3 screws.
(b) Slide the front door lock assembly downward, and remove the front door lock assembly and cables as a unit.
17. REMOVE FRONT DOOR LOCK ASSEMBLY (w/ Power Door Lock)





(a) Using a "TORX" socket wrench (T30), remove the 3 screws.
(b) Slide the front door lock assembly downward, and remove the front door lock assembly and cables as a unit.
(c) Remove the door lock wiring harness seal from the front door lock assembly.
18. REMOVE FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/o Power Door Lock)





(a) Remove the front door lock remote control cable assembly.
19. REMOVE FRONT DOOR LOCK REMOTE CONTROL CABLE ASSEMBLY (w/ Power Door Lock)





(a) Remove the front door lock remote control cable assembly.
20. REMOVE FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY (w/o Power Door Lock)





(a) Remove the front door inside locking cable assembly.
21. REMOVE FRONT DOOR INSIDE LOCKING CABLE ASSEMBLY (w/ Power Door Lock)





(a) Using a screwdriver, disengage the 3 claws.
HINT: Tape the screwdriver tip before use.





(b) Remove the front door inside locking cable assembly.