Installation

MIRROR (EXT): OUTER REAR VIEW MIRROR: INSTALLATION

INSTALLATION

1. INSTALL OUTER REAR VIEW MIRROR ASSEMBLY





(a) Engage the claw to install the outer rear view mirror assembly.
(b) Aligning the threads and temporarily tighten the 3 screws by hand.
(c) Tighten the 3 screws.
Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTE: If the specified torque cannot be obtained, replace the outer rear view mirror assembly with a new one.





(d) Connect the connector.
(e) Engage the clip.
2. INSTALL OUTER MIRROR COVER





(a) Engage the 7 claws to install the outer mirror cover.
3. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/o Front No. 2 Speaker) Reassembly
4. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (w/ Front No. 2 Speaker) Reassembly
5. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Reassembly
6. INSTALL FRONT ARMREST UPPER BASE PANEL (w/o Power Window) Reassembly
7. INSTALL FRONT ARMREST UPPER BASE PANEL (w/ Power Window) Reassembly
8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL Reassembly
9. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) Reassembly