Removal

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS: DECELERATION SENSOR (for 4WD without VSC): REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

2. REMOVE FRONT SEAT ASSEMBLY
HINT: Refer to the instructions for Removal of the front seat assembly (w/o Seatback Board) Removal.

3. REMOVE DECELERATION SENSOR





(a) Remove the 2 bolts and yaw rate sensor bracket with deceleration sensor.





(b) Disconnect the connector and clamp from the deceleration sensor.
NOTE: Do not remove the installation nuts.