Removal

2AZ-FE INTAKE / EXHAUST: EXHAUST PIPE (for 4WD): REMOVAL

REMOVAL

1. REMOVE TAIL EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the tail exhaust pipe assembly from the 3 exhaust pipe supports.
(c) Remove the gasket from the center exhaust pipe assembly.
(d) Remove the exhaust tail pipe baffle sub-assembly. (with baffle model)
2. REMOVE HEATED OXYGEN SENSOR Removal
3. REMOVE CENTER EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts.
(b) Remove the center exhaust pipe assembly from the 3 exhaust pipe supports.
(c) Remove the gasket from the front exhaust pipe assembly.
4. REMOVE FRONT EXHAUST PIPE ASSEMBLY





(a) Remove the 2 bolts, 2 compression springs and front exhaust pipe assembly.
(b) Remove the gasket from the exhaust manifold.