Installation

HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: INSTALLATION

INSTALLATION

1. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)





(a) Install the blower motor sub-assembly with the 3 screws.
(b) Connect the connector.
(c) Engage the clamp.
2. INSTALL BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)





(a) Install the blower motor sub-assembly with the 3 screws.
(b) Connect the connector.
(c) Engage the clamp.
(d) Install the quick heater connector screw.
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover) Installation