Installation

LIGHTING (EXT): HEADLIGHT DIMMER SWITCH: INSTALLATION

INSTALLATION

1. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY





(a) Engage the claw while loosening the clamp as shown in the illustration.





(b) Engage the clamp and install the headlight dimmer switch assembly as shown in the illustration.
(c) Connect the connector.
2. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation
3. INSTALL SPIRAL CABLE WITH STEERING ANGLE SENSOR Installation
4. INSTALL UPPER STEERING COLUMN COVER Installation
5. INSTALL LOWER STEERING COLUMN COVER Installation
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY Installation
7. INSTALL NO. 1 SWITCH HOLE BASE Installation
8. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Manual Transaxle) Installation
9. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL (for Automatic Transaxle) Installation
10. INSTALL FRONT NO. 1 CONSOLE BOX INSERT Installation
11. INSTALL FRONT NO. 2 CONSOLE BOX INSERT Installation
12. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 2WD) Installation
13. INSTALL FRONT CONSOLE BOX ASSEMBLY (for 4WD) Installation
14. INSTALL CONSOLE BOX CARPET
15. INSTALL NO. 2 SWITCH HOLE BASE Installation
16. INSTALL FRONT UPPER CONSOLE BOX Installation
17. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Manual Transaxle) Installation
18. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (for Automatic Transaxle) Installation
19. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation
20. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle) Installation
21. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY Installation
22. INSTALL METER HOOD SUB-ASSEMBLY Installation
23. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
24. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
25. POSITION FRONT WHEELS STRAIGHT AHEAD
26. ADJUST SPIRAL CABLE Installation
27. INSTALL STEERING WHEEL ASSEMBLY Installation
28. INSPECT STEERING WHEEL CENTER POINT
29. INSTALL STEERING PAD Installation
30. INSTALL LOWER NO. 3 STEERING WHEEL COVER Installation
31. INSTALL LOWER NO. 2 STEERING WHEEL COVER Installation
32. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
33. INSPECT STEERING PAD Installation
34. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light Diagnosis System.