Generator Signal Circuit

LIGHTING (EXT): LIGHTING SYSTEM: Generator Signal Circuit

Generator Signal Circuit

DESCRIPTION

The daytime running light relay receives an engine condition signal via the generator.

WIRING DIAGRAM





INSPECTION PROCEDURE

PROCEDURE

1. CHECK DAYTIME RUNNING LIGHT RELAY ASSEMBLY




(a) Measure the voltage according to the value(s) in the table below.
Standard Voltage:






NG -- INSPECT GENERATOR ASSEMBLY
OK -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
2. INSPECT GENERATOR ASSEMBLY
(a) Inspect the generator assembly Testing and Inspectionfor 2ZR-FE, Testing and Inspection for 2AZ-FE).
Result:






C -- REPLACE GENERATOR ASSEMBLY
B -- REPLACE GENERATOR ASSEMBLY
A -- REPAIR OR REPLACE HARNESS OR CONNECTOR (GENERATOR ASSEMBLY - DAYTIME RUNNING LIGHT RELAY)